GHL.Support is independent and not affiliated with HighLevel, Inc. If you start a HighLevel account through a link on this page we earn a commission at no extra cost to you. It never changes a number we publish. Read our full disclosure.
TLDR: GoHighLevel for contractors costs $97 a month when you own the account, plus tens of dollars a month of texting and call usage. Your marketing company pays HighLevel $297 or $497 for unlimited sub-accounts and rents you one inside its retainer.
The software behind your “system” is $97 a month. Your phone number and its texting registration are the two things that break when you leave, so move those first and cancel last.
You run an HVAC, plumbing, roofing or electrical company. Two years ago a marketing company set you up with “the system”: a number that texts back when you miss a call, a review request after every job, a follow-up sequence for the estimates that stall. It works, and you pay for it every month. What nobody told you is the name of the software underneath, or what it costs on its own.
This guide shows you what is inside your account, what it costs to own, what moves cleanly, and the order that keeps your phones ringing through the switch. You also get the honest case for keeping your agency.
What is inside your GoHighLevel account, and why it matters
Strip the branding away and your home-services sub-account holds five things that make you money. The missed-call text-back that answers a ringing phone you did not reach. The estimate follow-up that pings a homeowner when your quote sits unopened. The review request tied to your Google Business Profile that fires after a completed job. And the seasonal campaigns and the booking calendar.
Every one of those is a HighLevel feature with a help-center article behind it, from the missed-call text-back workflow to review automation and bulk campaign enrollment. Your agency configured them and did not invent them, which is why you get to ask what the software costs by itself.
The single most valuable asset in your account is the phone number. It is on your trucks, your yard signs and your Google listing. Everything else is configuration.
What does GoHighLevel for contractors cost when you own it?
HighLevel publishes its prices, and I checked them on August 31, 2026. The Starter plan is $97 a month or $970 a year, and it gives you up to three sub-accounts, unlimited contacts and unlimited users with the full CRM, pipeline management, calendars, workflow automation, email marketing and SMS marketing built in. Unlimited at $297 and Agency Pro at $497 are for companies that resell the platform, and you need neither.
Usage sits on top of your subscription, and it is small. A local number rents for $1.15 a month, text messages run $0.00747 per segment before carrier fees, and outbound calls cost about $0.0166 per minute. A single-location contractor sending 2,000 text segments and talking for 1,000 minutes a month lands around $39 to $51 in telecom usage at the rates HighLevel publishes. That is a modeled estimate, not a benchmark, and your volume sets your bill.
Add it up and your owned account with ordinary usage costs about $1,500 a year. Published rate cards from contractor marketing specialists tell a different story: one lists HVAC SEO at $1,500 to $2,300 per location per month, and another lists SEO at $2,800 a month with ad management from $2,000. Nearly all of that difference buys people and ad spend, not HighLevel, and the plan-by-plan breakdown is in our GoHighLevel pricing guide.
What exports cleanly, and what has to be rebuilt?
You have three ways to move, and they are not equal. A contact export gives you a spreadsheet: names, emails, phone numbers, tags and custom-field values. HighLevel’s export guide says it leaves behind your automation history, and by its nature a contact file carries none of your workflows, funnels or calendars. It is a backup, not a migration, and you take it on day one anyway.
A snapshot, which only your agency creates, copies the configuration: workflows, funnels, calendars, forms, pipelines, custom fields, tags and templates. It leaves behind your contacts, appointments, conversations, Stripe connection and third-party integrations. It is the second-best path and it depends on your agency’s cooperation.
The best path is an intact sub-account transfer. HighLevel’s transfer guide says the releasing agency’s owner or an authorized admin must initiate it, the receiving side approves it, and HighLevel does not support partial transfers. Your websites, funnels, calendars, automations, contacts, conversations, opportunities and history all come across together. Two catches: transferred automations arrive in Draft, and you reconnect your external calendar, Google, Facebook, Stripe and email-sending connections by hand. “It transferred” is not “it is live.”
The migration order that keeps your phones ringing
Do these in sequence and you keep any interruption to a planned window you chose.
- Inventory everything: numbers, domains, the Google Business Profile connection, ad accounts, forms, calendars, workflows, and who holds the login for each.
- Export your contacts as a backup the same day.
- Open the receiving account in your own name and on your own card.
- Decide the phone path: HighLevel’s built-in LC Phone or your own Twilio. Both sides on LC Phone is the smoother transfer.
- Move the number and its texting registration, then confirm both are live before anything else.
- Transfer the intact sub-account, or load the agreed snapshot, then reconnect domains, calendars, Google and email sending.
- Test calls, texts, forms, booking links and review links end to end, with a real phone in your hand.
- Publish workflows one at a time and watch the first run of each.
- Cancel the old service last, after everything above has passed.
HighLevel’s own eject documentation says automations arrive in Draft, so step eight is not optional, and its phone migration guide exists because step five is the one that costs owners their texting. Keep the old arrangement alive until you have personally sent and received a text from the new one.
The trap: your phone number and your A2P registration are two different moves
Federal rules protect the account holder’s right to keep a number. The FCC’s number portability order says a losing carrier cannot refuse a valid port because of an unpaid balance, and a later FCC order requires simple ports to complete within one business day of a complete request. The right belongs to whoever holds the account, so check whose name your number sits under.
Texting is not. Business texting in the United States runs on A2P 10DLC registration, and Twilio’s documentation is explicit that the registered Brand must be the actual business sending the messages. If your agency registered the campaign under its own brand, that registration does not follow your number. Moving the number alone leaves you with a line that rings and does not text. Twilio says manual campaign reviews take 10 to 15 days, and HighLevel’s own phone-move guide warns that A2P approvals do not always follow a moved number, so you confirm the attachment after the move.
Now stack the timelines. A clean port completes in about a business day, but when the account holder, address or PIN on the request does not match the carrier’s records, the carrier rejects it and the clock starts over. A campaign review takes 10 to 15 days, and a rejected campaign starts that clock again. Cancel your agency on the first of the month and you lose missed-call texting for most of it, while CallRail’s benchmark data says as many as 85 percent of callers who do not get through never call back.
In June 2026 a Las Vegas law firm that Spectral Vision works with discovered its call-tracking numbers had been dead for weeks. Nobody noticed, because the calls simply stopped. Register your A2P campaign under your own business, in your own account, before the old one closes. It is the one step I will not let a client skip.
When keeping your agency is the right call
Sometimes the retainer is the best hire you have. Google’s own Local Services Ads guidance says regularly missed calls and unanswered messages may hurt your ranking, and managing LSA well is ongoing work. An agency that does that work, runs your ads, keeps your reviews answered and maintains your workflows is selling labor, and labor is worth paying for.
HighLevel automation is not set-and-forget either: its own snapshot documentation warns that deleting a workflow step during a refresh drops the contacts waiting on it, so somebody has to own that maintenance. If marketing gets a few hours of your week at best, the honest question is not whether you would be able to run the system. It is whether you will, at 9 pm, after a day on ladders.
The markup is fair when it buys named work you see every month and weak when it buys a branded login. Ask your agency for last month’s list of work. A real operator has it ready.
Ready to own your account? Here is how we help
Spectral Vision has built and run HighLevel for HVAC, landscaping, cabinet and construction companies in Las Vegas, and we have taken a client phone line through A2P verification ourselves. We also run our own agency account, so we are not here to say every agency rips you off, only to show you what the software costs and help you own it.
Sign up for your own HighLevel account through our link and we migrate your contacts, pipelines, calendars, automations and funnels into it at no charge. You pay HighLevel directly, from $97 a month. We handle phone-number porting and A2P re-registration as part of the move.
The money comes from HighLevel, not from you. It pays referrers a 40 percent recurring commission on the subscription you would be paying anyway, which on Starter is $38.80 a month to us and nothing extra to you. We would rather say that plainly than have you wonder.
GoHighLevel for contractors: the questions owners ask
Is GoHighLevel a good CRM for contractors?
For the front of your business, yes: lead capture, missed-call text-back, follow-up, booking and review requests are its strengths. It is not a full field-service platform, so dispatch routing, job costing and inventory still live better in tools built for the trades, with HighLevel as your marketing and sales layer beside them.
How much does GoHighLevel cost for a contractor?
Owned directly, your Starter plan is $97 a month or $970 a year as of August 31, 2026, plus usage. A single location typically adds tens of dollars a month for a number, texts and calls at HighLevel’s published rates.
Do you keep your business phone number when you leave a marketing agency?
Usually, when the number sits in your sub-account and you are the account holder of record: FCC portability rules stop a carrier from refusing a valid port over an unpaid balance. If your agency holds the number, HighLevel’s transfer process and your contract decide, so check who owns it before you give notice. The catch is texting: your A2P 10DLC registration belongs to a brand and a campaign, not to the number, so you re-register it under your business before the old account closes or your texts stop delivering.
What if your agency refuses to transfer your GoHighLevel sub-account?
HighLevel’s process requires the releasing agency to initiate the transfer, so check your contract’s ownership terms before you give notice. If the agency will not cooperate, export your contacts, port your number, register A2P under your own business and rebuild in an account you own.
How long does a GoHighLevel migration take for a contractor?
Plan around the texting side. A clean number port completes in about a business day, A2P campaign review runs 10 to 15 days, and a rejected campaign starts that clock again. Your CRM configuration moves in hours once the receiving account exists, so keep both accounts running until the new line texts.
Ready to put the account in your own name?
Sign up for your own HighLevel account through our link and we migrate your contacts, pipelines, calendars, automations and funnels into it at no charge. You pay HighLevel directly, from $97 a month.
Start Your Own HighLevel Account
Want the basics first? Read our guide to HighLevel automations or browse the Email and SMS marketing articles.
Want more of this in your Google feed? Tap here and Google shows you our articles first.
